Material identification codes: what they mean, what they do not, and how the PPWR changes them

The small numbers and letter abbreviations printed on packaging (PET 1, PAP 21, ALU 41) are among the most widely seen and most widely misread markings in the packaging value chain. They identify what a material is. They do not state what happens to it after use. As the EU moves from the Packaging and Packaging Waste Directive to the Packaging and Packaging Waste Regulation, the legal status of these codes changes materially.

What material identification codes are

A material identification code is a standardised combination of a number and, in most cases, a letter abbreviation, applied to packaging to indicate the material from which it is made. In the European Union the system is set out in Commission Decision 97/129/EC of 28 January 1997, which established the identification system for packaging materials pursuant to Directive 94/62/EC on packaging and packaging waste (OJ L 50, 20.2.1997, p. 28).

The Decision allocates numbering ranges by material family and pairs each number with an abbreviation describing the material. The structure is deliberately simple: a single field on the pack conveys composition to anyone handling the item downstream, whether that is a consumer at a household bin, a municipal collection scheme or an operator on a sorting line.

Table of packaging material identification code ranges: plastics 1 to 19, paper and fibreboard 20 to 39, metals 40 to 49, wood 50 to 59, textiles 60 to 69, glass 70 to 79 and composites 80 to 99, with example codes.
Numbering ranges established by Commission Decision 97/129/EC. The full list of materials and abbreviations appears in the Annexes to the Decision.

How the numbering is structured

Codes are grouped into bands, each reserved for a material family. Plastics occupy the range 1 to 19, with the familiar codes PET 1 for polyethylene terephthalate, PE-HD 2 for high-density polyethylene, PVC 3, PE-LD 4, PP 5 for polypropylene and PS 6 for polystyrene. Paper and fibreboard occupy 20 to 39, with PAP 20 for corrugated fibreboard, PAP 21 for non-corrugated fibreboard and PAP 22 for paper. Metals occupy 40 to 49, principally FE 40 for steel and ALU 41 for aluminium. Wood, textiles and glass follow in their own bands, and composite materials are allocated the upper range, expressed with a leading “C/” and the abbreviation of the predominant material.

The complete list of materials and abbreviations is set out in the Annexes to Decision 97/129/EC, and readers applying the system in practice should work from the text of the Decision itself rather than from secondary summaries.

What the codes mean, and what they do not

Key point

A material identification code is a statement of composition, not of environmental performance. It does not indicate that the packaging is recyclable, that it is recycled in practice, that it contains recycled content, that it is compostable, or that it should be placed in any particular household bin. A code confirms only what the material is.

This distinction matters commercially as well as technically. Whether a given format is recycled depends on collection infrastructure, sorting capability, reprocessing capacity and end-market demand in the specific jurisdiction where the packaging is disposed of. Two items bearing the same code may have entirely different practical outcomes in different Member States. A code travels with the pack; infrastructure does not.

The visual association with the Möbius loop compounds the confusion. Where a code appears within a triangular arrow symbol, many consumers read it as a recycling claim. It is not one. Under Decision 97/129/EC the numbering and abbreviations serve identification purposes; claims regarding recyclability or environmental performance (including the distinction between bio-based, biodegradable and compostable) are governed by separate legal provisions and, where made commercially, by consumer protection and green claims rules.

Voluntary under the Directive

A feature of the existing framework that is frequently overlooked is that application of the codes has been voluntary. Article 3 of Decision 97/129/EC provides that use of the numbering and abbreviations shall be voluntary for the plastics, paper and fibreboard, metals, wood, textile and glass materials listed in its Annexes. Article 8(2) of Directive 94/62/EC likewise framed identification as a matter of indicating the nature of the material used, rather than an unconditional obligation.

In practice this produced uneven application across the single market, reinforced by divergent national labelling schemes, among them the French Triman marking and the Italian environmental labelling requirements, which obliged operators to manage different artwork for different markets. It is precisely this fragmentation that the Regulation is intended to resolve.

What changes under the PPWR

Regulation (EU) 2025/40 on packaging and packaging waste (the PPWR) replaces Directive 94/62/EC. It entered into force on 11 February 2025 and applies from 12 August 2026, from which date the Directive is repealed, subject to transitional provisions in Article 70 under which certain provisions continue to apply for a defined period.

The central change for identification is one of legal character. Labelling requirements are addressed in Article 12 and Annex VII of the Regulation, which provide for a harmonised system covering material composition, sorting and, for packaging within formal reuse systems, reusability. Material composition marking, which depends on how the packaging is classified, including whether it is composite packaging, moves from a voluntary convention to a mandatory requirement applying uniformly across the Union, with the detailed pictogram specifications to be set out in Commission implementing acts.

Legal status

Adopted and in force. Regulation (EU) 2025/40 is adopted law. Not yet fully applicable. The harmonised labelling obligations are deferred, and the pictogram designs depend on implementing acts not yet finalised at the time of writing. Operators should treat published pictogram proposals as indicative until the implementing act is adopted.

Transition timeline

The transition is staged rather than immediate, and the dates are conditional on the adoption of implementing acts. The sequence is as follows.

DateDevelopment
11 February 2025Regulation (EU) 2025/40 enters into force.
12 August 2026PPWR applies. Directive 94/62/EC is repealed, subject to the transitional provisions in Article 70.
12 August 2028
(or 24 months after entry into force of the relevant implementing acts, whichever is later)
Harmonised labelling becomes mandatory: packaging placed on the market must bear a harmonised label indicating material composition and supporting correct sorting.
12 February 2029
(or 30 months after the relevant implementing acts, whichever is later)
Harmonised reusability labelling applies to packaging within formal reuse systems.
TransitionalUnder Article 70, Article 8(2) of Directive 94/62/EC continues to apply until 30 months from entry into force of the implementing act adopted under Article 12(6) PPWR.

Two points deserve emphasis. First, the labelling dates are conditional: they are expressed as the later of a fixed date or a period running from adoption of the implementing acts, so slippage in the implementing acts moves the obligation. Second, the transitional architecture means the Directive-era identification provisions do not disappear on 12 August 2026; they continue to operate for a defined period while the new system is brought into effect.

Practical implications

For economic operators, the shift from a voluntary convention to a mandatory harmonised label has consequences that extend beyond artwork. Accurate material composition data becomes a compliance input rather than a technical detail, and the same data feeds recyclability assessment. Artwork templates need space reserved for harmonised pictograms before final designs are confirmed. Existing national markings need to be mapped so that they can be withdrawn in an orderly way as harmonisation takes effect. Where responsibility for labelling sits with an importer rather than a manufacturer established outside the Union, that allocation needs to be settled contractually well in advance.

None of this alters the underlying point. A harmonised label will communicate composition and support sorting with far greater consistency than the voluntary system it replaces. It will still not, by itself, make a claim that the packaging is recyclable in practice. That question is governed by the recyclability provisions of the Regulation and by the infrastructure available where the packaging is discarded.

References

  • Commission Decision 97/129/EC of 28 January 1997 establishing the identification system for packaging materials pursuant to European Parliament and Council Directive 94/62/EC on packaging and packaging waste (OJ L 50, 20.2.1997, p. 28). EUR-Lex
  • European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste, Article 8. EUR-Lex
  • Regulation (EU) 2025/40 of the European Parliament and of the Council on packaging and packaging waste, in particular Article 12, Annex VII and Article 70. EUR-Lex

This article reflects independent professional analysis and is provided for informational purposes. It does not constitute legal advice or an official position of any organisation. Dates tied to implementing acts remain subject to change; readers should verify the current position against the consolidated legal texts before relying on it. Last reviewed July 2026.